Filter
Top Products
38
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
English
|
39
Listen to the CD/ Audio file
8-5. Playback mode
You can select a playback mode, such as Random
play and Repeat play.
Press [SRC] to select a CD/ USB/ SD (“CD”/
“USB”/ “SD”) source.
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Play Mode” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a playback mode function using
[Control] knob.
Display Description
“Disc Random” (CD)/
“Folder Random”
(Audio file)
When set to “ON”, plays the songs in the CD/
folder randomly.
* (ON) / i (OFF)
“All Random” (Audio
file)
When set to “ON”, plays all songs in the disc/
USB/SD randomly.
* (ON) / i (OFF)
“Track Repeat” (CD)/
“File Repeat” (Audio
file)
When set to “ON”, plays the selected song
repeatedly.
* (ON) / i (OFF)
“Folder Repeat” (Audio
file[1])
When set to “ON”, plays the songs in the folder
repeatedly.
* (ON) / i (OFF)
[1] Except the Music Editor media
Press [Control] knob.
The setting is changed.
Exiting from the Function setting mode
Press and hold [1/6].
8-6. About the Audio file
• Playable Audio files
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav)
of USB device/ SD card
• Playable disc media
CD-R/RW/ROM
• Playable disc file formats
ISO 9660 Level 1/2, Joliet, Long file name.
• Playable USB devices
USB mass storage class
• Playable USB device and SD card file system
FAT12, FAT16, FAT32
Even if the audio files comply with the standards
listed above, playback may be impossible depending
on the type or condition of the medium or device.
• Playback order of the Audio files
In the example of folder/file tree shown below, files
are played in the order of number from (1) to (6).
;: folder
-: Audio file
For the online manual describing audio files, visit
www.kenwood.com/cs/ce/audiofile/. In this online
manual, detailed information and notes which are
not provided in this manual are provided. Make sure
to read through the online manual as well.
What is a USB device?
• In this manual, the term “USB device” indicates a flash
memory or digital audio player which has a USB terminal.
8-4. Skip search ratio setting
(Music Editor media <8-9. About “KENWOOD Music
Editor Light” and “KENWOOD Music Control”> (page
40))
You can change the ratio of skip performed as
mentioned in <8-3. Skip search> (page 37).
Press [SRC] to select a USB/ SD (“USB”/ “SD”)
source.
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Settings” > “Skip Search” using
[Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a ratio using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [1/6].
8-7. About the USB device
• When the USB device is connected to this unit, it is
charged when this unit is powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device via a USB hub or
multi card reader.
• Save backups of the audio files used with this unit.
The files can be erased depending on the operating
condition of the USB device.
We shall not be liable for any damage arising out of
erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• When connecting the USB device, use of the
CA-U1EX (option) is recommended.
• Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 4 m can result in abnormal playback.