Filter
Top Products
English
|
19
Demonstration mode setting
Turning the demonstration mode ON/OFF.
1 Select Demonstration item during Menu mode
Select the “DEMO MODE” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Set the Demonstration mode
Press the [AUD] knob for at least 2 seconds.
Pressing this button for 2 seconds or longer toggles
the setting between “ON” and “OFF”.
Manual Clock Adjustment
1
Select Clock Adjustment item during Menu
mode
Select the “CLOCK ADJUST” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter Clock adjustment mode
Press the [AUD] knob for at least 1 second.
The clock display blinks.
3 Adjusting Clock
Adjustment item Operation
Hours Push the [AUD] knob towards up
or down.
Minutes Push the [AUD] knob towards right
or left.
4 Exit Clock adjustment mode
Press the [SEARCH] button.
Function of KDC-X493
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the unit.
1 Select AMP Control item during Menu mode
Select the “AMS CONTROL” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter AMP Control mode
Press the [AUD] knob for at least 1 second.
3 Select the AMP Control item for adjustment
Turn the [AUD] knob or push it towards up or
down.
⁄
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
Push the [AUD] knob towards right or left.
5 Exit AMP Control mode
Press the [SEARCH] button.