Filter
Top Products
16
|
English
English
|
17
Tuner features
Function of remote
Direct Access Tuning
Entering the frequency and tuning.
1 Select the band
Press the [FM] / [AM] button.
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3 Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency Press button
92.1 MHz (FM) [0], [9], [2], [1]
810 kHz (AM) [0], [8], [1], [0]
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
• If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled.
Station Preset Memory
Putting the station in the memory.
1 Select the band
Press the [FM] / [AM] button.
2 Select the frequency to put in the memory
Turn the [4] / [¢] knob.
3 Put the frequency in the memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.
Auto Memory Entry
Putting stations with good reception in the
memory automatically.
1 Select the band for Auto Memory Entry
Press the [FM] / [AM] button.
2 Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
Preset Tuning
Calling up the stations in the memory.
1 Select the band
Press the [FM] / [AM] button.
2 Call up the station
Press the desired [1] — [6] button.
HD Radio control features
c.s.
OPEN
FM
AM
SRC
AUTO/AME
4/ ¢
1 - 6
ATT
M
P
S
ST
TI DAB NEWS MP3 WMA
DIGITAL ANALOG RDS PTY
ATT
M
P
S
ST
TI DAB NEWS MP3 WMA
DIGITAL ANALOG RDS PTY
Preset station number
ST indicator
Band display
Frequency display
NOTE
With the HD Radio tuner, you can use the similar
functions to <Tuning Mode>, <Station Preset
Memory>, <Auto Memory Entry>, and <Preset
Tuning> of Tuner features. Refer to Tuner features
(page 15,16) for how to use the functions.
Tuning
Selecting the station.
1 Select HD Radio source
Press the [SRC] button.
Select the "HD Radio" display.
2 Select the band
Press the [FM] button.
Each time the [FM] button is pressed it switches
between the HF1, HF2, and HF3 bands.
When the [AM] button is pressed, it switches
HA band.
3 Tune up or down band
Turn the [4] / [¢] knob.
• When you connect an HD Radio, Tuner features of
the unit are disabled and switched to HD Radio tuner
features. A portion of the setting methods including
the Tuning Mode will change.
• During reception of stereo stations the "ST" indicator
is ON.
• The setting of the CRSC is always ON. Switching to
OFF is not possible.
• Using <Receive mode Setting> (page 30) the modes
can be switched to digital broadcast automatic
switching, analog broadcast only, or digital broadcast
only.
• When "Digital" has been set with <Receive mode
Setting> (page 30), the seek time will be longer to
allow a check of whether the transmission is a digital
broadcast.
Function of the Ez700SRFunction of the Ez700SR