Filter
Top Products
NAMES AND
FUNCTIONS
21
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS SETUP
ENGLISH
2-5 LIP SYNC
With some video components connected to the
unit, there may be a time lag between the video
signal processing and the audio signals. While it
may be a mere time lag, it can seriously affect the
enjoyment of movies or music.
The LIP.SYNC function delays the audio signals and
adjusts the difference in their timing from the video
signals.
The default setting is 0 ms, and adjustment up to
200 ms is possible.
1. Press the 3/4 cursor buttons to move the
cursor to LIP SYNC on the INPUT SETUP
sub-menu.
Blu-ray CONFIG
NAME :BLU-RAY
DIGITAL IN :---
AUDIO MODE :HDMI
AUTO SURROUND:AUTO
>LIP SYNC :0ms
RETURN TO INPUT SETUP
• Press the 1/2 cursor buttons to adjust the
time lag.
Tip
For adjusting the time lag while monitoring the
images on the display, projector or other video
component, refer to “LIP.SYNC FUNCTION”
(page 28).
Note
• 0 ms is set for this function in the SOURCE
DIRECT mode. When the SOURCE DIRECT
mode is released, the value that has been set is
restored.
SETUP
3 SPEAKER/R. EQ SETUP
After you have installed the unit connected all the
components and determined the speaker layout, it
is now time to perform the settings in the Speaker
Setup menu for the optimum sound acoustics for
your environment and speaker layout.
Before you perform the following settings, it is
important that you fi rst determine the following
characteristics:
• AUTO SETUP:
“3-1 AUTO SETUP” (see page 22)
• MANUAL SETUP:
“SPEAKER COFIG” (see page 22)
“SPEAKER DISTANCE” (see page 23)
“SPEAKER CROSSOVER” (see page 23)
“ROOM EQ SETUP” (see page 23)
1. Select “SPEAKER SETUP” from the MAIN
MENU with 3 or 4 cursor buttons and
press the ENTER button.
SPEAKER/R.EQ SETUP
>AUTO SETUP
SPEAKER CONFIG
SPEAKER DISTANCE
SPEAKER CROSSOVER
ROOM EQ SETUP
RETURN TO MAIN MENU
2. Select the desired menu with the 3 or
4 cursor buttons, and press the ENTER
button.
Note
• After you complete this the portion of the setup,
press the 3, 4, 1, and 2 cursor button. The
cursor will move to “RETURN TO SETUP
MENU” and press the ENTER button to go to
the Sub-menu.
SPEAKER/R.EQ SETUP
>AUTO SETUP
SPEAKER CONFIG
SPEAKER DISTANCE
SPEAKER CROSSOVER
ROOM EQ SETUP
RRETURN TO MAIN MENU
SPEAKER DISTANCE
>UNIT : METERS
FRONT LEFT : 10.0ft
CENTER : 10.0ft
FRONT RIGHT: 10.0ft
SURR RIGHT : 10.0ft
SURR.B R : 10.0ft
SURR.B L : 10.0ft
SURR LEFT : 10.0ft
SUBWOOFER : 10.0ft
RETURN TO SETUP MENU
SPEAKER X-OVER
>FRONT :FULL RANGE
CENTER :70Hz
SURROUND :70Hz
SURR.B :70Hz
RETURN TO SETUP MENU
ROOM EQ CONFIG
>MODE : OFF
RETURN TO MAIN MENU
AUTO SETUP
BEFORE STARTING THE
SYSTEM PLEASE PLUG
THE MIC. IN USING
THE FRONT PANEL JACK
**WARNING**
THE TEST TONE IS LOUD
>START
RETURN TO MAIN MENU
AUTO SETUP
COMPLETED
>APPLY CANCEL
SPEAKER CONFIG
>CENTER : YES
SURROUND : YES
SURR.B : 2CH
SUBWOOFER: YES
RETURN TO SETUP MENU