Filter
Top Products
18
En
Tip
• To reduce noise, do not tie signal cables together with the power
cable. Wire them so that they are away from each other.
• Depending on the country, the integrated amplifier may be
polarity-sensitive. In this case, plug the power cord in a way that
provides the best sound quality.
Note
• Never disconnect the power cord from the integrated
amplifier while the other end is still plugged into a wall
outlet. Doing so may cause an electric shock. Always disconnect
the power cord from the wall outlet first, and then the integrated
amplifier.
• Turning on the integrated amplifier may cause a momentary
power surge that might interfere with other electrical equipment
on the same circuit. If this is a problem, plug the integrated
amplifier into a different branch circuit.
• Do not use a power cord other than the one supplied with the
integrated amplifier. The supplied power cord is designed
exclusively for use with the integrated amplifier and should not
be used with any other equipment.
Connecting the Power Cord
Integrated Amplifier A-9000R
Supplied power cord
To an AC wall outlet
(Plug type varies from country to country.)
1
Connect all of your speakers and components.
2
Connect the supplied power cord to the integrated
amplifier’s AC INLET.
3
Plug the power cord into an AC wall outlet.