Filter
Top Products
23
En
Use the MM/MC selector on the back of the integrated amplifier to select either MM or MC,
in accordance with the cartridge format of the turntable.
Remove the short pins plugged into the jacks before connecting a turntable to the PHONO
inputs.
Note
• Always turn off the integrated amplifier before switching between MM and MC.
Tip
• If your turntable has a built-in phono preamp, you can connect the turntable to other analog inputs such
as LINE IN 1.
• If your turntable has a ground wire, connect it to the GND screw. With some turntables, connecting the
ground wire may produce an audible hum. If this happens, disconnect it.
Tip
• Connect your cassette tape deck to either of the following jacks: LINE IN 1/2/3.
Connecting a Turntable
L
R
AUDIO
OUTPUT
Turntable without a built-in
phono preamp
Integrated Amplifier A-9000R
MM/MC selector
Connecting a Cassette Tape Deck
AUDIO
OUT
L R
Integrated Amplifier A-9000R
Cassette tape deck