Filter
Top Products
31
En
You can adjust the bass, treble and left/right output
balance respectively.
■ Operating with the remote controller
■ Operating on the integrated amplifier
Tip
• By default, bass and treble are set to 0, and balance is set to the
center position (no visible bars).
Note
• The integrated amplifier will end the adjustment if there is no
operation for 5 seconds.
• While the Direct function is enabled, the tone controls are
disabled and pressing the buttons will display the message
“DIRECT”.
• When headphones are connected, the balance can’t be adjusted
and pressing the buttons will display the message “PHONES”.
Adjusting the Bass, Treble and Balance
1
Press TONE/BAL repeatedly.
`BASS:
`TRBL (Treble):
You can adjust the bass and treble levels from -6
to +6.
`L, R (Balance):
The left and right output balance can be adjusted.
The more the bars move to the right, the higher
the volume will be on the right output.
Conversely, the more the bars move to the left,
the higher the volume will be on the left output.
When no bar appears on the display, the volume
is evenly distributed.
2
Press / repeatedly.
The adjustment is automatically confirmed.
To exit the adjustment, press RETURN.
TONE/BAL
RETURN
/
1
Press BASS -/+, TREBLE -/+, or BALANCE L/R
repeatedly.
The adjustment is automatically confirmed.
BASS -/+ TREBLE -/+ BALANCE L/R
You can temporarily mute the output of the integrated
amplifier.
Note
• While the integrated amplifier is muted:
– Adjusting the volume or setting the integrated amplifier to
Standby will unmute the integrated amplifier.
– Pressing INPUT / on the remote controller or turning the
INPUT selector on the integrated amplifier will display the
current input for 3 seconds.
•If MUTING is pressed while a setting is being performed, the
setup will be terminated.
• Even if the power is turned off or the power cord is unplugged,
the muting function will be maintained on to the next session.
Muting the Sound
1
Press MUTING.
The message “MUTING” flashes on the information
display.
To unmute the integrated amplifier, press MUTING
again.
MUTING