Onkyo A-9000R Car Amplifier User Manual


 
28
En
Turning On & Basic Operations
Basic Operations
Operating with the remote controller
Operating on the integrated amplifier
Tip
After showing the volume level from the last session, the
message “MUTING” flashes on the information display until
the speakers or headphones become active.
After a certain time of warming up, the internal temperature of
the integrated amplifier stabilizes, and the sound is softened.
The integrated amplifier remembers the state when power was
last turned off, and returns to that state.
Operating with the remote controller
Operating on the integrated amplifier
Tip
For details on power management settings, see “Setting the Auto
Standby Function” (page 38).
Turning On/Off the Integrated Amplifier
POWER
ON/STANDBY
Turning On the Integrated Amplifier
1
Set POWER to the ON position ( ) on the
integrated amplifier.
2
Press .
The integrated amplifier comes on, and the
information display lights.
1
Set POWER to the ON position ( ).
2
Press ON/STANDBY.
The integrated amplifier comes on, and the
information display lights.
Turning Off the Integrated Amplifier
1
Press .
The integrated amplifier enters Standby mode and the
information display goes off.
2
To completely shut down the integrated amplifier,
set POWER to the OFF position ( ) on the
integrated amplifier.
1
Press ON/STANDBY.
The integrated amplifier enters Standby mode and the
information display goes off.
2
To completely shut down the integrated amplifier,
set POWER to the OFF position ( ).