Filter
Top Products
16
You can save and load up to five combinations of menu settings and adjustments made with the picture adjustment
knob as user data. You can also return settings and adjustments to their factory defaults.
User data include the following settings.
• Menu settings except “SETUP LOAD/SAVE” (including button function settings on the monitor front panel)
• Screen adjustments made with the picture adjusting knob
1. Press [MENU] to display the MAIN menu.
2. Press [ , ] to select the “SYSTEM CONFIG”
menu and press [ENTER].
3. Press [ , ] to select the “SETUP SAVE” sub
menu and press [ENTER].
The setting in the sub menu changes to green.
4. Press [ , ] to select a “USER1” to “USER5”
file to save the settings to and press [ENTER].
The following screen appears.
5. Select “YES” and press [ENTER].
This saves the user data.
1. Press [MENU] to display the MAIN menu.
2. Press [ , ] to select the “SYSTEM CONFIG”
menu and press [ENTER].
3. Press [ , ] to select the “SETUP LOAD” sub
menu and press [ENTER].
The setting in the sub menu changes to green.
4. Press [ , ] to select a “USER1” to “USER5”
file to load and press [ENTER].
The following screen appears.
To return to the factory defaults, select “FACTORY.”
5. Select “YES” and press [ENTER].
This loads the user data.
To return to the previous screen
Push [MENU].
Saving user data
Changes to green
Loading user data
Changes to green
User Data