Filter
Top Products
24
■ FUNCTION setting restrictions
Settings are not available under the following conditions.
Setting Conditions that disable operation
HV DELAY
During SUB WINDOW, WFM, PIXEL TO PIXEL mode operation, “INVALID FUNCTION”
appears to indicate that operation is disabled.
When “RGB-COMP.” is selected under “YP
BPR/RGB” or “DVI-COMP.” is selected under
“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
operation is disabled.
AUTO SETUP
When something other than “RGB-COMP.” is selected under “YP
BPR/RGB” in the “INPUT
SELECT” menu, “NOT RGB-COMP. CH” appears to indicate that operation is disabled.
When “RGB-COMP.” is selected under “YP
BPR/RGB” in the “INPUT SELECT” menu and
no signal is input, “INCOMPLETE” appears to indicate that operation is disabled.
GAMMA SELECT
When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
When “RGB-COMP.” is selected under “YP
BPR/RGB” or “DVI-COMP.” is selected under
“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
operation is disabled.
SD ASPECT
When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
During SUB WINDOW (still image) and HD display (including PIXEL TO PIXEL), “INVALID
FUNCTION” appears to indicate that operation is disabled.
SCAN
When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
During SUB WINDOW and PIXEL TO PIXEL mode operation, “INVALID FUNCTION”
appears to indicate that operation is disabled.
SUB WINDOW
When “RGB-COMP.” is selected under “YP
BPR/RGB” or “DVI-COMP.” is selected under
“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
operation is disabled.
If you select “RGB-COMP.” or “DVI-COMP.” while motion picture is displayed in sub-
window, the screen returns to a single screen display. Selecting something other than
“RGB-COMP.” or “DVI-COMP.” opens the split screen mode and a still image is blacked
out.
WFM/VECTOR
During SUB WINDOW and PIXEL TO PIXEL mode operation, “INVALID FUNCTION”
appears to indicate that operation is disabled.
When “RGB-COMP.” or “RGB-VIDEO” is selected under “YP
BPR/RGB”, or “DVI-COMP.” or
“DVI-VIDEO” is selected under “DVI-D” in the “INPUT SELECT” menu, “INVALID
FUNCTION” appears to indicate that WFM operation is disabled.
1080/23P, 24P, 25P, 29P or 30P input causes “INVALID FUNCTION” to appear indicating
that operation is disabled,
VECTOR does not appear when a selection other than “SDI” is made in the “INPUT
SELECT” menu.
MARKER
When “RGB-COMP.” is selected under “YP
BPR/RGB” or “DVI-COMP.” is selected under
“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
operation is disabled.
When GPI is set during sub-window operation, “INVALID FUNCTION” appears to indicate
that operation is disabled.
PIXEL TO PIXEL
When “SD1” or “SD2” is selected in the “INPUT SELECT” menu during 1080I/P signal
input or “YP
BPR” is selected in “YPBPR/RGB”, 1080I/P signal input is enabled. When other
settings are made, “INVALID FUNCTION” appears to indicate that operation is disabled. In
SUB WINDOW mode, “INVALID FUNCTION” appears to indicate that operation is
disabled.
LEVEL METER
When input is something other than SDI, “INVALID FUNCTION” appears to indicate that
operation is disabled.
MONO
When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
TIMECODE
When input is something other than HD-SDI input, “INVALID FUNCTION” appears to
indicate that operation is disabled.
Main Menu (continued)