Filter
Top Products
42
Specifications
■ General
Input power
is the safety information.
Dimensions:
• Including stand
430 (W) mm × 323.5 (H) mm × 198 (D) mm
[16
15
/
16
(W) inches × 12
3
/
4
(H) inches × 7
13
/
16
(D) inches]
• Main body only, not including stand
430 (W) mm × 309 (H) mm × 81.1 (D) mm
[16
15
/
16
(W) inches × 12
3
/
16
(H) inches × 3
3
/
16
(D) inches]
Mass:
• Including stand
7.1 kg (15.7 lb)
• Main body only, not including stand
6.2 kg (13.7 lb)
Operating temperature:
+5 °C to +35 °C (+41 °F to +95 °F)
Operating humidity:
20 % to 80 % (no condensation)
Storage temperature:
-20 °C to +60 °C (-4 °F to +140 °F)
■ Panel
Size: 17.0 type
Aspect ratio: 15:9
Number of pixels: 1280 × 768 (WXGA)
Display colors: Approx. 16,770,000 colors
View angle: 176° up/down, 176° right/left
■ Input/output Connectors
Image signal input:
VIDEO:
1 line, BNC × 2
(1 connector with through-out configuration)
Analog component:
1 line for YP
BPR/RGBS, BNC × 8
(4 connectors with through-out configuration)
However, when input is RGB-COMP. this becomes
BNC × 5 (R, G, B, HD, and VD).
(Through-out is not available)
SDI:
Compliant with SMPTE 274M, 296M, 259M-C and
ITU-R BT.656-4
2 lines, BNC × 3
(1 connector with switched-out configuration)
DVI-D (HDCP compatible): TMDS single link
1 line, DVI-D × 1
Vertical frequency: 50.0 - 60.0 Hz
Horizontal frequency: 31.5 - 67.5 kHz
Dot clock: 25 - 165 MHz
Audio input: Pin jack × 2 (stereo)
Headphone output: Stereo minijack M3 × 1
GPI: D-SUB, 9 pins × 1
RS-232C: D-SUB, 9 pins × 1
DC input: XLR, 4 pins × 1
■ Signal level
VIDEO
EXT SYNC signal level: 0.3 Vp-p to 4.0 Vp-p
HD/VD signal level: TTL level
AUDIO
AUDIO input level: 0.5 Vrms
Speaker output: 0.5 W + 0.5 W
Headphone output: 32 Ω, level adjustable
■ SDI embedded audio
HD-SDI: SMPTE299M compatible
Sampling rate: 48 kHz, synchronous/asynchronous
8 ch
SD-SDI: SMPTE272M compatible
Sampling rate: 48 kHz, synchronous
4 ch
■ Standard accessories
<For BT-LH1760P>
Operationg instructions × 1
Warranty (Card) × 1
Power cord × 1
Power cord hook × 1
Screw × 1
<For BT-LH1760E>
Operationg instructions × 1
AC mains lead × 2
AC mains lead hook × 1
Screw × 1
■ Optional units
Rack Mount Adaptor
BT-MA1710G
Wall Mount Adaptor
BT-WMA17G
Protection Panel
BT-PRP17G
AC:
DC:
Power supply:
100 V - 240 V, 50/60 Hz
12 V (11 V - 17 V)
Power consumption:
0.6 A - 0.3 A
4.0 A
Inrush current, measured according to European standard
EN55103-1: 5.62A