30
31
Main menu (continued)
Sub menu Settings Description
(From the previous
page)
<FOCUS-IN-RED>
*
3
*
5
Turns On/Off the function that highlights in red the section of the image that is
being focused.
<LEVEL METER>
*
2
Turns the AUDIO LEVEL METER display On and Off.
<CROSS HATCH>
*
2
Displays the cross hatch grid.
The display changes in the following order.
CROSS HATCH OFF → CROSS HATCH LOW → CROSS HATCH HIGH
<MONO>
*
2
*
3
Switches between color and monochrome.
<BLACK MODE>
*
1
*
6
This mode is for reducing floating black and checking the gradation of dark
sections.
The brightness of the backlight is reduced and the contrast is increased so that up
to 75 % of the input signal level has the same gamma curve as the set GAMMA
SELECT. The signal level on or above that is clipped at 75 %.
<TIME CODE>
*
2
Turns the time code display on and off.
<CLOSED CAPTION>
*
2
Turns the closed caption display on and off.
For details on the available operation items, refer to page 33.
<AUDIO MUTE>
Turns on or off the audio MUTE function.
<UNDEF>
Undefined
FUNCTION
DISPLAY
*
7
OFF
ON1
ON2
*
8
Selects display of functions assigned to [FUNCTION1] - [FUNCTION5] (front panel
buttons). It also selects button action (1-touch, 2-touch, off).
<OFF> 1-touch action to perform functions. Functions are not displayed.
<ON1> 1-touch action to display and perform functions.
<ON2> 2-touch action to display and perform functions.
• Pressing the [FUNCTION1] to [FUNCTION5] buttons will not activate FUNCTION operation when the rotary knob is used for picture
adjustments.
*
1
The settings are cancelled when the power is turned OFF.
*
2
If these settings are changed, the menu settings will also change.
*
3
The control settings do not operate during GPI operation.
*
5
During FOCUS-IN-RED operation, use the rotary knob to change the detection sensitivity. The setting range is from 0 to 30, with a
higher numerical value resulting in higher detection sensitivity (the focus becomes worse).
*
6
The bright picture is clipped. The back light and contrast cannot be adjusted.
*
7
The operating status is displayed regardless of the ON/OFF setting.
*
8
The function displayed with the ON2 setting can be operated with a button only during the time that it is displayed.