Panasonic BT-LH1850E Car Video System User Manual


 
38
Main menu (continued)
39
INPUT SELECT
The underlined values are factory preset setting values.
Sub menu Settings Description
VIDEO
AUTO
NTSC
PAL
Selects the VIDEO input format.
*
1
<AUTO> Automatically selects NTSC or PAL.
<NTSC> NTSC
<PAL> PAL
NTSC SETUP
00
75
Selects NTSC setup level.
<00> Select this when the signal is at a 0 IRE setup level.
<75> Select this function when using 7.5 % setup signals.
(The unit internally adjusts the 7.5 % setup level to suit the black level)
DVI-I
DIGITAL
ANALOG
Selects DVI-I input mode.
<DIGITAL> Selects digital input.
<ANALOG> Selects analog input.
DIGITAL
AUTO
VIDEO
COMP.
Selects a DVI-I digital input mode.
<AUTO> Selects the input mode automatically depending on the input format.
<VIDEO> Selects component input.
<COMP> Selects PC input.
ANALOG
YPBPR
RGB-COMP.
Selects YP
BPR (component) or RGB input mode when DVI-I is set to ANALOG.
<YP
BPR> Selects YPBPR signals
<RGB-COMP> Selects the PC RGB signal.
COMPONENT
LEVEL
SMPTE
B75
B00
Selects the YPBPR (component) signal input level of DVI-I analog inputs.
<SMPTE> Signal level complies with SMPTE and PB and PR are 0.7 V [p-p] at 100 %
chroma.
<B75> Select this when connecting a Betacam or similar device with a setup function.
(The unit internally adjusts the 7.5 % setup level to suit the black level)
<B00>
Select this when connecting a Betacam or similar device without a setup function.
RGB-COMP. Performs analog PC settings. (This page)
*
1
“AUTO” is the factory default, but select an appropriate format when there is risk that the input signal may be contaminated by outside
noise.
RGB-COMP.
Selecting “ANALOG.” under “DVI-I” in the “INPUT SELECT” menu and selecting “RGB-COMP.” under “ANALOG” opens the following
menu.
The underlined values are factory preset setting values.
Sub menu Settings Description
H POSITION 0 to 60
(Factory default setting: 30)
Adjusts horizontal image display position in 2-clock units.
*
2
V POSITION 0 to 15
(Factory default setting: 8)
Adjusts vertical image display position.
*
2
PHASE 0 to 31
(Factory default setting: 16)
Adjusts the clock phase in 1/32 clock period increments.
*
2
CLOCK 700 to 1900
(Factory default setting
*
3
)
Adjusts the sampling clock in 2 clock units.
*
2
WXGA H SAMPLE 1280
1366
Select a WXGA format.
<1280> Select a 1280 x 768 format.
<1366> Select a 1366 x 768 format.
RESET Returns H POSITION, V-POSITION, PHASE and CLOCK settings in the
RGB-COMP. input compliant format to their factory defaults.
*
2
Each (compatible) input format can be adjusted but not when user data is loaded (→page27 “SETUP LOAD”) or saved (→page27
“SETUP SAVE”)
*
3
“CLOCK” factory default
Format CLOCK Format CLOCK
640×480 (60 Hz) 800 1280×768 (60 Hz) 1664
800×600 (60 Hz) 1056 1366×768 (60 Hz) 1792
1024×768 (60 Hz) 1344