40
Main menu (continued)
41
DISPLAY SETUP
The underlined values are factory preset setting values.
Sub menu Settings Description
WFM/VECTOR
OFF
WFM Y
WFM R
WFM G
WFM B
VECTOR
Switches between “WFM/VECTOR” waveform and vector display.
<WFM Y> - <WFM B> Displays waveforms.
<VECTOR> Displays vector waveforms.
*
1
POSITION RT
RB
LB
LT
Selects the position for the “WFM/VECTOR” waveform display.
*
1
<RT> Right Top
<RB> Right Bottom
<LB> Left Bottom
<LT> Left Top
VECTOR MODE
×1
×2S
×2
×4
×8
Enlarges vector waveforms.
*
1
<×1> 1 ×
<×2S> State in which displayed at scale of 1 x, and only waveforms enlarged to 2 x.
<×2> 2 ×
<×4> 4 ×
<×8> 8 ×
VECTOR SCALE
75%
100%
Determines the scale of vector waveform.
<75%> Displays it at 75 % scale.
<100%> Displays it at 100 % scale.
TIME CODE
OFF
ON
Turns the time code display on and off.
POSITION
TOP
RIGHT
CENTER
LEFT
Selects position of time code display.
<TOP> Top Center
<RIGHT> Bottom Right
<CENTER> Bottom Center
<LEFT> Bottom Left
FONT SIZE
SMALL
LARGE
Selects font size of time code display.
<SMALL> Menu font size
<LARGE> Twice the height and width of menu font size
MODE SELECT
LTC
VITC
LUB
VUB
Selects time code display mode.
<LTC> Displays linear time code (LTC).
<VITC> Displays vertical interval time code (VITC).
<LUB> Displays user bits included in LTC.
<VUB> Displays user bits included in VITC.
CLOSED CAPTION
OFF
ON
Turns closed caption display on and off.
*
2
CC TYPE CEA-608 (ANC)
CEA-608 (VBI)
CEA-608 (708)
CEA-708
OP-42
OP-47
Selects the closed caption display mode.
<CEA-608(ANC)> Displays data compliant with CEA-608 (ANC).
<CEA-608(VBI)> Displays data compliant with CEA-608 (VBI).
<CEA-608(708)> Displays CEA-608 standard data transmitted according to the
CEA-708 standard.
<CEA-708> Displays data compliant with CEA-708.
<OP-42> Displays OP-42 data
<OP-47> Displays OP-47 data
CAPTION
CHANNEL
CC1
CC2
CC3
CC4
Selects the closed caption display channel for when CEA-608.
CAPTION SERVICE
SRV1
SRV2
SRV3
SRV4
SRV5
SRV6
Selects the closed caption display service for when CEA-708.
*
1
Opens the vector display during SDI signal input.
*
2
A bright line appears on line 21 when signal input is set to ON during video and underscan is enabled.