Filter
Top Products
32
Main menu (continued)
33
FUNCTION setting restrictions
Under the following conditions, “INVALID FUNCTION” is displayed and the settings cannot be configured.
Settings Inoperable Condition or Mode
HV DELAY • SUB WINDOW
• WFM
• PIXEL TO PIXEL
• During DVI-I (digital or analog signal PC) input
• When HDMI (640 x 480) input
• When INT-SG is selected
GAMMA SELECT • When GPI is set
• During DVI-I (digital or analog signal PC) input
• When HDMI (640 x 480) input
SD ASPECT • When GPI is set
• SUB WINDOW (Still image)
• When HD signal input
• During DVI-I (digital or analog signal PC) input
• When HDMI (640 x 480) input
SCAN • When GPI is set
• SUB WINDOW
• PIXEL TO PIXEL
• During DVI-I (digital or analog signal PC) input
• When HDMI (640 x 480) input
SUB WINDOW • During DVI-I (digital or analog signal PC) input
• When HDMI (640 x 480) input
WFM/VECTOR (VECTOR is not displayed when other than SDI1 or SDI2 input)
• SUB WINDOW
• PIXEL TO PIXEL
• During DVI-I (digital or analog signal PC) input
• When HDMI (640 x 480) input
• When INT-SG is selected
MARKER • When GPI is set
• SUB WINDOW
• PIXEL TO PIXEL
• During DVI-I (digital or analog signal PC) input
• When HDMI (640 x 480) input
WHITE BALANCE When other than VAR1 to VAR3 selected in COLOR TEMP.
PIXEL TO PIXEL (Enabled when HD signal input)
• When other than HD signal input
• During GPI setting
• SUB WINDOW
• During DVI-I (digital or analog signal PC) input
• During HDMI (640 x 480) input
• During INT-SG selection
PIXEL POSITION During input other than HD signal input
FOCUS-IN-RED • When GPI is set
• When INT-SG is selected
• When BLUE ONLY ON is selected
• SUB WINDOW
• During DVI-I (digital or analog signal PC) input
• During HDMI (640 x 480) input
• During NO SIGNAL input
MONO • When GPI is set
• When HDMI (640 x 480) input
TIME CODE When other than HD-SDI input
CLOSED CAPTION • During DVI-I (digital or analog signal PC) input
• When HDMI (640 x 480) input
BLACK MODE During NO SIGNAL input