Filter
Top Products
44
45
CQ-VX220W
English
■ USB
Device Not Supported
No playable files exist.
aUse the type of USB device that is suitable for this unit.
An unsupported USB device was connected.
aRecord files that can be played back on this unit onto the USB device.
Hardware Error
A USB device that exceeds the current capacity that can be supplied was connect-
ed.
aUse a USB device that has a consumption current of less than 500 mA.
For some reason, an over-current was detected.
aSwitch the Source, and select USB (MP3/WMA) mode again.
aCheck that the USB connector section is not dirty, and that there is no foreign
material.
Read Error
No operation by some cause.
aSwitch the power or ACC ON/OFF. If this does not solve the problem, unplug
the power cord and plug it in again. In case the unit is still out of order, con-
sult your dealer. (
a
Installation Instructions)
Decode Error
No operation by some cause.
aSwitch the power or ACC ON/OFF. If this does not solve the problem, unplug
the power cord and plug it in again. In case the unit is still out of order, con-
sult your dealer. (
a
Installation Instructions)
File Error
The player for some reason cannot read the file you are trying to play. (File record-
ed in an unsupported file system, compression scheme, data format, file name
extension, damaged data, etc.)
aConfirm that the USB extension cable is firmly connected, and reconnect if
not. Select a file that the player can read. Check the type of data stored in
the USB device. Format the USB device if necessary.
DRM Protected
A WMA file can be copyrighted.
aThe file protected by copyright is not playable.
No File
Your USB device has no playable file.
aDownload playable file to your USB device.