Filter
Top Products
How to Use Menu Functions
36
Menu
Item Adjustments / Configurations (alternatives)
Sound
Speaker Distance to
Wall
Compensates for the low frequency sound due to the distance between the
speakers and the wall [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
MPX
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
HDMI1 / 2 / 3 / 4 Input
Selects to fit the input signal [Digital] / [Analogue] (p. 82)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable
connection
●
For HDMI input
Reset to Defaults
Press the OK button to reset the current Sound Mode, [Balance],
[Headphone Volume] and [Surround] to the default settings
Network
Connection Test,
Network Connection,
Wireless Network
Settings, IP/DNS
Settings
Sets the network setting to use in your network environment (p. 59, 60)
Network Link Settings Sets to control the TV with the devices connected to the network (p. 58)
Software Update Checks for available software updates from the Panasonic website
New Software Message
Selects whether to give a notification message when new software is found via
network [Off] / [On]
Network Status Displays the network status (MAC Address, current network settings, etc.)
Timer
Off Timer
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 20)
Auto Standby
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
●
Automatic input switching with the connected equipment affects this function
and time-count will be reset.
●
The notification message will appear 3 minutes before going into Standby mode.