Filter
Top Products
Tuning and Editing Channels
41
Set TV channel manually [Manual Tuning]
[Fine Tuning]:
Use to make small adjustments to the tuning of an individual channel (affected by weather conditions, etc.).
[Manual Tuning]:
Set TV channel manually after Auto Tuning.
●
Set [Sound System] and [Colour System], and then perform this function. Normally set [Colour System] to [Auto].
●
If a VCR is connected only with the RF cable, select channel position [0].
5.5MHz
CH570
1120
Manual Tuning
Fine Tuning
Manual Tuning
Sound System
Colour System
Store
Auto
1 Select the channel position 2 Select the channel
3 Search 4 Select [Store]
select
store
Auto Tuning using the buttons on the TV
For Auto Tuning, using the buttons on the TV (p. 11)
1 Press the F button repeatedly until [Auto Tuning] appears
●
To return to TV
●
Control panel OSD appears
when pressing the control
panel button.
2 Access [Auto Tuning]
3 Start [Auto Tuning]