Filter
Top Products
EN 31
English
Change the time zone
In countries with clock transmission data, you
can change the time zone if [Auto clock
mode] > [Automatic] or [Country
dependent] is selected.
1. In the [Clock] menu, select [Time zone].
2. Select your time zone, then press OK.
Set daylight saving time
In countries with clock transmission data, you
can enable or disable daylight saving time if
[Auto clock mode] > [Automatic] or
[Country dependent] is selected.
1. In the [Clock] menu, select [Daylight
saving].
2. Select [Standard time] or [Daylight saving
time], then press OK.
Set the clock manually
You can set the date and time manually.
Before you start, set the clock mode to
[Manual].
1. In the [Clock] menu, select [Date] or
[Time], then press OK.
2. Set the time or date with the Navigation
buttons.
3. Select [Done], then press OK.
Sleep timer
You can switch the TV to standby after a
specified time. During the countdown to the
specified time, you can switch off your TV
earlier or reset the sleep timer.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [Sleep timer].
3. Select the sleep timer duration.
The sleep timer can be set up for to 180
minutes. To switch off the sleep timer, set it
to zero minutes.
4. Press OK to activate the sleeptimer. After
the specified time, the TV switches to
standby.
Child lock
To protect children from unsuitable TV
programmes, you can lock the TV or block
age rated programmes.
Set or change the child lock code
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Child lock].
3. Select [Set code] or [Change code].
4. Enter the code with the Numeric
buttons.
Tip: If you access the channels from the
channel list, you are prompted to enter your
lock code. If you forget your code, enter
‘8888’ to override any existing codes.
Lock or unlock channels
1. In the child lock menu, select [Channel
lock].
2. Enter the child lock code with the
Numeric buttons.
3. Select the channels to lock or unlock.
Restart the TV to activate the lock.
Note:
If you access the channels from the channel
list, you are prompted to enter your lock
code.
Parental rating
You can set your TV to display only
programmes with age ratings lower than
your child's age. This restriction only applies
to digital channels from broadcasters that
rate their programmes according to age.
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Child lock] > [Parental rating].
You are prompted to enter the child lock
code.
4. Enter the child lock code with the
Numeric buttons.
5. Select an age rating, then press OK.
All programmes above the selected age
rating are blocked.
For information on child lock codes, see Use
more of your TV > Set locks and timers >
Child lock (Page 31).