Filter
Top Products
User Manual BDL4230ET
RETURN TO THE CONTENTS
1.4. MOUNTING THE DISPLAY
Wall mounting holes
Notes:
• M6 (10mm) screws (with a length 10-15mm longer than
the thickness of the mounting bracket) are needed for wall
mounting (not included). Tighten the screws securely
(recommended torque: 470 - 635N cm)
• The mounting interface should comply with the UL1678
standard in North America. The mounting means should be
strong enough to bear the weight of the display (approx. 28
kg (61.7 lb) without stands).
Warning: Not for use in portrait mode. Warranty will be void if
installed in any orientation other than landscape.