Filter
Top Products
5 Turn MULTI-CONTROL to select a phone
book entry you want to call.
# You can also perform the same operation by
pushing MULTI-CONTROL up or down.
6 Press MULTI-CONTROL to display the
phone number list of the selected entry.
# You can also display the phone number list of
the selected entry by pushing MULTI-CONTROL
right.
# You can scroll literal information by pressing
and holding DISP/SCRL. To stop scrolling, press
DISP/SCRL.
# If several phonenumbers are included in an
entry, select one byturning MULTI-CONTROL.
# If you want to go back and selectanother
entry, push MULTI-CONTROL left.
7 Press MULTI-CONTROL to make a call.
8 To end the call, press PHONE/
/
BT MENU.
Using the missed, received and
dialed call lists
The 80 most recent calls dialed, received, and
missed are stored in memory. You can browse
them and call numbers from these lists.
1 Press PHONE/
/BT MENU to switch to
the phone number list mode.
# If TEL isselected as the source, press /LIST
to switch to the phone number list mode.
2 Use MULTI-CONTROL to select
Missed calls, Dialed calls or Received calls.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select a phone
number.
Turning MULTI-CONTROL to change the
phone numbers stored in the list.
# You can also change the phone number by
pushing MULTI-CONTROL up or down.
4 Press MULTI-CONTROL to display the
detailed list.
Name, phone number and date are displayed
in the detailed list.
# You can also display the detailed list by push-
ing MULTI-CONTROL right.
# You can scroll literal information by pressing
and holding DISP/SCRL. To stop scrolling, press
DISP/SCRL.
# Turning MULTI-CONTROL switches to the pre-
vious or next phone number displayed in the de-
tailed list.
# If you do not operate anything within about 30
seconds, the list display is canceled automati-
cally.
5 Press MULTI-CONTROL to make a call.
6 To end the call, press PHONE/
/
BT MENU.
Introduction to advanced
operations
1 Press and hold PHONE/ /BT MENU to
select TEL as the source.
2 Press MULTI-CONTROL to display the
main menu.
3 Use MULTI-CONTROL to select
FUNCTION.
The function menu is displayed.
Turn to change the menu option. Press to se-
lect.
4 Turn MULTI-CONTROL to select the
function.
PH B Transfer (phone book transfer)—
Auto answer (automatic answer setting)—
Far end Volume (Adjust the intended party’s
listening volume)—Ring tone (ring tone se-
lect)—Number dial (call by entering number)
—SCO Private Mode (private mode)
Using Bluetooth wireless technology
En
37
English
Section
08