Filter
Top Products
Notes
! To return to the playback display, press
BAND/ESC/CANCEL.
! If you do not operate functions other than
PH B Transfer, and Number dial within about
30 seconds, the display automatically returns
to the ordinary display.
! You can operate SCO Private Mode only
while talking on the phone.
! If Bluetooth telephone is not connected to this
unit, Number dial cannotbe operated.
Transferring entries to the
phone book
Phone books in your cellular phone can be
transferred to this unit by using your cellular
phone.
! 1000 entries for each user (max. 5 devices)
can be stored in the phone book. Each in-
dependent entry can hold five phone num-
bers and genres.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
PH B Transfer.
3 Press MULTI-CONTROL to enter the
phone book transfer standby mode.
4 Use the cellular phone to perform
phone book transfer.
Perform phone book transfer using the cellu-
lar phone. For detailed instructions, refer to
the instruction manual that came with your
cellular phone.
When phone book transfer is completed,
Data transferred is displayed.
# The display indicates how many entries have
been transferred and the total number to be
transferred.
Setting automatic answering
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
Auto answer.
3 Press MULTI-CONTROL to turn auto-
matic answering on.
# To turn automatic answering function off,
press MULTI-CONTROL again.
Adjusting the intended party’s
listening volume
To maintain the good speech quality, this unit
can adjust the intended party’s listening vo-
lume. If the volume is not enough for intended
party, adjust this function.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
Far end Volume.
3 Push MULTI-CONTROL left or right to
select the desired setting.
1—2—3—4—5
# This function can be performed even while
talking on the phone.
# Settings can be stored for each device.
Switching the ring tone
You can select whether to use this unit’s ring
tone or not. If this function is set to on, ring
tone from this unit will sound.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
Ring tone.
Using Bluetooth wireless technology
En
38
Section
08