Filter
Top Products
Turning the unit on
% Press SOURCE to turn the unit on.
When you select a source, the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 18).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Tuner—Television—DVD player/Multi-
DVD player—Built-in CD player—Multi-
CD player—iPod—External unit 1—Exter-
nal unit 2—AUX1—AUX2
Notes
! In the followingcases, the sound sourcewill
not change:
— When thereis no unit corresponding to the
selected source connectedto this unit.
— When thereis no disc in theunit.
— When thereis no disc in theDVD player.
— When thereis no magazine inthe multi-
CD player.
— When thereis no magazine inthe multi-
DVD player.
— When theAUX (auxiliary input) is setto off
(refer to page65).
! External unit refersto a Pioneer product(such
as one availablein the future) that,although
incompatible as asource, enables control of
basic functions bythis unit. Two external units
can be controlled by thisunit. When two exter-
nal units areconnected, the allocation of
them to externalunit 1 or externalunit 2 is
automatically set bythis unit.
! When this unit’s blue/whitelead is connected
to the vehicle’s auto-antenna relaycontrol
terminal, the vehicle’s antennaextends when
this unit’s sourceis turned on. To retract the
antenna, turn thesource off.
Loading a disc
1 Press EJECT to open the front panel.
CD loading slot appears.
# After a CD hasbeen inserted, press SOURCE
to select thebuilt-in CD player.
2 Insert a CD into the CD loading slot.
Front panel is closed automatically, and play-
back will start.
CD loadingslot
# You caneject a CD by pressing EJECT.
Notes
! The built-in CDplayer plays one standard,12-
cm or 8-cmCD at a time. Donot use an adap-
ter when playing 8-cmCDs.
! Do not insertanything other than aCD into
the CD loadingslot.
! There is sometimesa delay between starting
up CD playbackand the sound beingissued.
When being read,Format read isdisplayed.
! If you cannot inserta disc completely or if
after you insert a disc the discdoes not play,
check that thelabel side of the discis up.
Press EJECT toeject the disc, andcheck the
disc for damagebefore inserting it again.
Basic Operations
En
13
English
Section
03