Filter
Top Products
Introduction of advanced
built-in CD player operation
1
1
1
1 Functiondisplay
Shows the function status.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn MULTI-CONTROL to select the
function.
Turn MULTI-CONTROL clockwise to switch be-
tween the functions in the following order:
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—Search mode (search meth-
od)—TitleInput "A" (disc title input)
# You canalso switch betweenthe functions in
reverse order byturning MULTI-CONTROL coun-
terclockwise.
# To return to theplayback display, pressBAND.
Notes
! If you do notoperate the function withinabout
30 seconds, thedisplay is automatically re-
turned to theplayback display.
! TitleInput "A" (disc titleinput) function is
not canceled automatically.
Repeating play
There are two repeat play ranges for the built-
in CD player: Disc repeat (disc repeat) and
Track repeat (one-track repeat).
1 Use MULTI-CONTROL to select
Play mode.
Play mode appears in the display.
2 Press MULTI-CONTROL to select the re-
peat range.
Press MULTI-CONTROL repeatedly until the
desired repeat range appears in the display.
! Disc repeat– Repeat the currentdisc
! Track repeat –Repeat just the current
track
Note
If you perform track searchor fastforward/re-
verse during Track repeat, therepeat play range
changes to Discrepeat.
Playing tracks in random order
Random play lets you play back tracks on the
CD in a random order.
1 Use MULTI-CONTROL to select
Random mode.
Random mode appears in the display.
2 Press MULTI-CONTROL to turn random
play on.
Tracks will play in a random order.
# To turn randomplay off, press
MULTI-CONTROL again.
Built-in CD Player
En
19
English
Section
05