Filter
Top Products
Introduction of advanced
TV tuner operation
1
1
1
1 Functiondisplay
Shows the function names.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
BSSM appears on the display.
# To return to thechannel display, pressBAND.
Note
If you do notoperate the function withinabout 30
seconds, the displayis automatically returnedto
the channel display.
Storing broadcast stations
You can easily store up to 12 broadcast sta-
tions for later recall.
1 When you find a station that you want
to store in memory, turn MULTI-CONTROL
to switch to the preset channel list mode.
2 Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number; press and
hold to store.
The preset number you have selected will
flash and then remain lit. The selected station
has been stored in memory.
# If you do notoperate the list within about30
seconds, the presetchannel list mode iscan-
celed automatically.
Notes
! Up to 24stations, 12 for eachof two TV bands,
can be storedin memory.
! You canalso store stations assignedto preset
tuning numbers 1–6 by pressingand holding
one of thepreset tuning buttons1–6 onthe re-
mote control.
Storing the strongest
broadcast stations
sequentially
1 Use MULTI-CONTROL and select
FUNCTION to display BSSM.
2 Press MULTI-CONTROL to turn BSSM
on.
Searching is displayed. While Searching is
displayed, the 12 strongest broadcast stations
will be stored in order from the lowest channel
up. When finished, the preset channel list ap-
pears.
# To cancel thestorage process, press
MULTI-CONTROL.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You canalso change the stationby pushing
MULTI-CONTROL up or down.
# If you do notoperate the list within about30
seconds, the presetchannel list mode iscan-
celed automatically.
TV tuner
En
41
English
Section
09