Filter
Top Products
2 Press MULTI-CONTROL to turn BSM on.
Searching is displayed. While Searching is
displayed, the six strongest broadcast frequen-
cies will be stored under preset tuning num-
bers 1–6 in the order of their signal strength.
When finished, the preset channel list ap-
pears.
# To cancel thestorage process, press
MULTI-CONTROL.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You canalso change the stationby pushing
MULTI-CONTROL up or down.
# If you do notoperate the list within about30
seconds, the presetchannel list mode iscan-
celed automatically.
Note
Storing broadcast frequencieswith BSM mayre-
place broadcast frequenciesyou have saved
using buttons 1–6.
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1 Turn MULTI-CONTROL to switch to the
preset channel list mode.
# You canalso perform this operation bypress-
ing joystickon the remote control.
2 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You canalso change the stationby pushing
MULTI-CONTROL up or down.
# If you do notoperate the list within about30
seconds, the presetchannel list mode iscan-
celed automatically.
Notes
! You canalso recall stationsassigned to preset
tuning numbers bypushing MULTI-CONTROL
up or downduring the channel display.
! You canalso recall stationsassigned to preset
tuning numbers 1–6 by pressingone of the
preset tuning buttons1–6 on the remotecon-
trol.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Use MULTI-CONTROL to select Local.
Local appears in the display.
2 Press MULTI-CONTROL to turn local
seek tuning on.
Local seek sensitivity (e.g., Level 2) appears in
the display.
# To turn local seektuning off, press
MULTI-CONTROL again.
3 Push MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: Level 1—Level 2—Level 3—Level 4
AM: Level 1—Level 2
The Level 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Tuner
En
17
English
Section
04