Filter
Top Products
Black plate (16,1)
2 Press MULTI-CONTROL to turn BSM on.
Searching is displayed. While Searching is
displayed, the six strongest broadcast frequen-
cies will be stored under preset tuning num-
bers 1–6 in the order of their signal strength.
When finished, the preset channel list ap-
pears.
# To cancel the storageprocess, press
MULTI-CONTROL.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You canalso change the station bypushing
MULTI-CONTROL up or down.
Note
Storing broadcast frequencieswith BSM may re-
place broadcast frequenciesyou have saved
using buttons 1–6.
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1 Press LIST to switch to the preset chan-
nel list mode during the frequency display.
2 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You canalso change the station bypushing
MULTI-CONTROL up or down.
# If you do not operatethe list within about 30
seconds, the presetchannel list mode is can-
celed automatically.
Notes
! You canalso recall radio station frequencies
assigned to preset tuningnumbers by push-
ing MULTI-CONTROL up or down duringthe
frequency display.
! You canalso recall radio station frequencies
assigned to preset tuningnumbers by press-
ing one of the presettuning buttons 1–6 on
the remote control.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Use MULTI-CONTROL to select Local in
the function menu.
Local appears in the display.
2 Press MULTI-CONTROL to turn local
seek tuning on.
Local seek sensitivity (e.g., Level 2) appears in
the display.
# To turn local seektuning off, press
MULTI-CONTROL again.
3 Push MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: Level 1—Level 2—Level 3—Level 4
AM: Level 1—Level 2
The Level 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
<CRD4089-A/N>16
Tuner
En
16
Section
04