Filter
Top Products
When this unitis connected toa display, youneed to
adjust the DVDoutput signal suitableto DVD and
your display signalsetting.
1 PressM.C. to display thesetting mode.
2 Turn M.C.to select an appropriateDVD output
signal.
NTSC—PAL
3 PressM.C. to confirm theselection.
V.OUT(display connection)
You can usethis unit withor without the display.
When using thisunit connected tothe display, you
can turnthe display connection settingon or off. If
you turnthis function on,the detailed textinformation
of the DVDand USB appearson the display.
1 PressM.C. to turn displayconnection on oroff.
Notes
! Operation is complete evenif the menuis can-
celled before being confirmed.
! The operation of this unit differs according to
the display connection on/off setting. The ex-
amples are as follows:
— Playing a compressed audio file and dis-
playing the file name list mode
! When the display connection is set to
on, the files of the currently playing
folder are displayed.
! When the display connection is set to
off, the file of the root folder is dis-
played.
— Playing a compressed audio file and press-
ing DISP/
/SCRL in the file name list
! When the display connection is set to
on, the name of the currently playing
file is selected.
! When the display connection is set to
off, you can return to the previous list
(the folder one level higher).
Using AUX1 and AUX2 source
For Southeast Asian models
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to AUX1 or AUX2. The relation-
ship between AUX1 and AUX2 sources is ex-
plained below.
About AUX1 and AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1 source:
When connecting auxiliary device using the
front AUX input
! You need to activate the AUX setting in the
initial setting menu. Refer to AUX1 (front
AUX input setting)/AUX2 (rear RCA input
setting) on the previous page.
1 Insert the mini plug into the AUX input
jack on this unit.
For more details, refer to Head unit on page 5.
This auxiliary device is automatically set to
AUX1.
2 Press SRC/OFF to select AUX1 as the
source.
AUX2 source:
When connecting auxiliary device using the rear
RCA input
! You need to activate the AUX setting in the
initial setting menu. Refer to AUX1 (front
AUX input setting)/AUX2 (rear RCA input
setting) on the previous page.
1 Use the rear RCA input to connect an
auxiliary device featuring RCA output.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX2.
# This type of connection can only be made if
the auxiliary device has RCA outputs.
2 Press SRC/OFF to select AUX2 as the
source.
En
27
Section
02
Operating this unit
Operating this unit