Filter
Top Products
Listening to radio stations
1 Press SRC to select the tuner.
2 Press BAND repeatedly to select a
band.
The indicator lights in the following order.
F1 (FM1)—F2 (FM2)—F3 (FM3)— AM (AM)
3 Auto Search: Press c/d (c/d on the re-
mote control).
When a station is received, searching stops.
4 Manual Search: Press and hold c/d (c/
d on the remote control) until MANUAL
appears, and then press it repeatedly.
The frequencies move up or down step by
step.
# When not operated for six seconds after man-
ual search, the ordinary tuner display is
shown.
Storing broadcast frequencies
You can easily store up to six broadcast fre-
quencies for later recall at the touch of a but-
ton.
1 Press BAND to select desired band you
want to store.
2 Select the desired frequency.
3 Press one of preset buttons 1 to 6 and
hold until the beep sound.
The number you have pressed will be dis-
played in the preset number indicator and
then remain lit. The selected radio station fre-
quency has been stored in memory.
4 Repeat steps 1 to 3 to preset other sta-
tions.
The next time, you press the same preset but-
ton, the radio station frequency is recalled
from the memory.
Notes
! Up to 18 FM stations, six for each of three FM
bands and six AM stations can be storedin
the memory.
! When a new station is stored in the preset sta-
tion button, the previously preset station is
automatically erased.
Auto search memory
This function lets you automatically store the
six strongest broadcast frequencies.
1 Press a.
The six strongest broadcast frequencies will
be stored under preset buttons 1 to 6 in the
order of their signal strength.
2 To cancel, press a.
To scan the preset stations
1 Press b.
Each preset station appears.
2 To cancel, press b.
To tune in the preset stations
1 Press BAND to select the desired band.
2 Press the desired preset buttons 1 to 6.
The preset station of the preset buttons 1 to 6
is displayed and the preset station is re-
ceived.
Radio operation
En
19
English
Section
06