Filter
Top Products
! If you change the source, CD play also stops
(without ejecting the disc). Next time you se-
lect CD as the source, CD play starts from
where playback has been stopped pre-
viously.
Pause
1 Press d/PAUSE (e on the remote con-
trol) during playback.
2 To return to playback, press d/PAUSE
(PLAYd or e on the remote control).
Skip to next track/file
% Press briefly d (p on the remote con-
trol) to select the next track or file.
Skip to previous track/file
% Press briefly c (o on the remote con-
trol) and press again within four seconds
of playing time.
Return to the beginning of
the current track/file
% Press briefly c (o on the remote con-
trol) after four seconds of playing time.
Moving to another track/file
When a disc has more than one track/file, you
can move to another track/file as follows:
1 Press SEARCH on the remote control.
2 Press the appropriate numbered button
(0 to 9) to select a track/file number.
Search
% Press and hold c/d (m/n on the re-
mote control) to select the required speed
during playback and then release at the
point you want.
# Backward search: m ×4, m ×8
Forward search: n ×4, n ×8
Intro scan
The first 10 seconds of each tracks/files
(SCAN) or each files in the current selected
folder (
SCAN) on the disc are are played.
1 Press SCAN.
SCAN
ACD
(or SCAN
MP3 WMA
) ap-
pears on the display window.
# Press and hold SCAN for abouttwo seconds
during playback.
MP3 WMA
SCAN appears on the display window.
2 Press SCAN again.
SCAN (or
SCAN) disappears from the dis-
play window and the intro scan is
cancelled.
Repeat
The current selected tracks/files (1 RPT)or
folder (
RPT) on the disc is played repeat-
edly.
1 Press RPT during playback.
1 RPT appears on the display window.
CD/MP3/WMA operation
En
21
English
Section
07