Filter
Top Products
2 To exit the repeat mode, press RPT
(REPEAT on the remote control) again.
The All icon appears on the TV screen.
Note
On a Video CD with PBC, you must set PBC to
Off on the setup menu. Refer to PBC on page
26.
Time search
The Time Search function allows you to start
playing at any chosen time on the disc.
1 Press DISPLAY on the remote control
during playback.
The on-screen display appears on the screen.
The Time Search box shows the elapsed play-
ing time of the current disc.
2 Within 10 seconds, press a/b to select
the Time Search icon in the on-screen dis-
play.
The –: ––: ––appears in the Time Search
box.
3 Within 10 seconds, use the number but-
tons to enter the required start time.
Enter hours, minutes, and seconds from left to
right in the box.
4 Within 10 seconds, press ENT to con-
firm the start time.
Playback starts from the selected time on the
disc.
# If you enter an invalid time, playback will con-
tinue from the current point.
Note
On a Video CD with PBC, you must set PBC to
Off on the setup menu. Refer to PBC on page
26.
Disc menu
DVD
DVDs may offer menus that allow you to ac-
cess special features.
1 Press D.MENU (DISC MENU/SET UP on
the remote control).
The disc menu is displayed.
2 Use a/b/c/d to highlight your selec-
tion, then press ENT.
3 To remove the disc menu, press
D.MENU (DISC MENU/SET UP on the re-
mote control) again.
PBC menu
VCD
% Press DISC MENU/SET UP or RETURN on
the remote control to return to the menu
screen. Menu settings and operating proce-
dures may differ. Follow the instructions
on the each menu screen.
# You also may set PBC to On under setup. See
page 26.
Camera angle
DVD
If the disc contains scenes recorded at differ-
ent camera angles, you can change to a differ-
ent camera angle during playback.
% Press ANGLE repeatedly on the remote
control during playback to select a desired
angle.
The number of the current angle appears on
the display.
DVD/VCD operation
En
31
English
Section
09