Filter
Top Products
To change the password:
1 SelectPassword on the Lock menu and then
press d.
2 Press ENT when the Change option is high-
lighted.
3 Entera current password using the numbered
buttons then press ENT.
4 Entera new password using the numbered
buttons then press ENT.
5 Enterthe password again to verify.
If you forget your password
If you forget your password you can clear it
using the following steps.
1 Press D.SETUP.
The Setup menu appears.
# You can perform the same operation by press-
ing and holding DISC MENU/SET UP on the re-
mote control.
2 Input the 6-digit number “210499” and
the password is cleared.
3 Enter a new password. Refer to To
make a new password: on the previous
page.
Area Code
Enter the code of the area whose standards
were used to rate the DVD video disc, accord-
ing to the area code. Refer to Area code list on
page 53.
1 Select Area Code on the Lock menu
then press d.
2 Follow the step 2 as shown on Rating
on the previous page.
3 Select the first character using a/b.
4 Press ENT and select the second charac-
ter using a/b.
5 Press ENT to confirm your country code
selection.
Others
PBC
Set Playback Control (PBC)toOn or Off.
! On: Video CDs with PBC are played accord-
ing to the PBC.
! Off: Video CDs with PBC are played in the
same way as Audio CDs.
Note
The PBC function is only available for playingthe
Video CD 2.0.
SET UP menu
En
26
Section
08