Filter
Top Products
Troubleshooting
Symptom Cause Action
Power doesn’tturn on.
The unitdoesn’t operate.
Leads andconnectors arenot prop-
erly connected.
Confirm once morethat all connectionsare
correct.
The fuseis blown. Rectify theproblem that caused thefuse to
blow, and thenreplace it. Be very sureto in-
stall thecorrect fuse with thesame rate.
Noise andother factors are causing
the built-in microprocessorto oper-
ate incorrectly.
Turn theunit off and then on.
The unitdoes not operate cor-
rectly evenwhen the appropriate
remote control buttonsare
pressed.
Battery poweris low. Load newbattery.
Some operations withcertain discs
are prohibited.
Check withanother disc.
Playback is notpossible. The discis dirty. Clean disc.
The loadeddisc is of atype this unit
cannot play.
Check whattype the disc.
No soundis heard.
The volumelevel will not rise.
Cables are notconnected correctly. Connectthe cablescorrectly.
The icon
is displayed, andop-
eration isnot possible.
The operation is prohibited forthe
disc.
This operation is notpossible.
The operation is notcompatible
with thedisc’ s organization.
This operation is notpossible.
The picturestops (pauses) and
the unitcannot be operated.
Reading ofdata has become impos-
sible during playback.
After pressing gonce, start playbackonce
more.
There’s nosound. The volumelevel is low. Adjust thevolume.
There’s audio andvideo skip-
ping.
This unit is notfirmly secured. Secure thisunit firmly.
The picture isstretched, the as-
pect isincorrect.
The aspectsetting is incorrect for
the display.
Select theappropriate settingfor yourdis-
play.
Additional Information
En
48
Appendix