Filter
Top Products
Playing an auxiliary
equipment
Before operating the auxiliary equipment using
the following procedure, select the external
input correctly. Refer to AUX (Auxiliary) ON/
OFF on page 18.
You can connect auxiliary equipment to this
unit.
1 Connect the auxiliary equipment to the
auxiliary input on the unit.
AUX inputjack (3.5 mm stereojack)
Auxiliary equipment(MP3 player, etc.)
2 Press SRC to select the AUX IN.
AUX IN appears in the display.
3 Turn on the connected auxiliary equip-
ment and start playing the source.
4 Adjust the volume.
Note
If the input level of the auxiliary equipment con-
nected to the AUX input jack is not high enough,
adjust the input level properly. Refer to AUX
(Auxiliary) 0 dB/+6 dB on page 18.
AUX operation
En
39
English
Section
12