Filter
Top Products
Important
! Check all connections and systemsbefore
final installation.
! Do not useunauthorized parts asthis may
cause malfunctions.
! Consult your dealerif installation requires dril-
ling ofholes or othermodifications to thevehi-
cle.
! Do not installthis unit where:
— it may interfere withoperation of thevehi-
cle.
— it may causeinjury toa passenger asa re-
sult of asudden stop.
! The semiconductor laser will bedamaged if it
overheats. Installthis unit away fromhot
places such asnear the heateroutlet.
! Optimum performance isobtained when the
unit is installedat an angleof less than60°.
60°
DIN front/rear mount
This unit can be properly installed using either
front-mount or rear-mount installation.
DIN Front-mount
1 Insert the mounting sleeve into the
dashboard.
For installation in shallow spaces, use the sup-
plied mounting sleeve. If there is enough
space, use the mounting sleeve that came
with the vehicle.
2 Secure the mounting sleeve by using a
screwdriver to bend the metal tabs (90°)
into place.
1
2
1 Dashboard
2 Mountingsleeve
3 Install the unit as illustrated.
Use commercially available parts when instal-
ling.
1
2
3
4
5
1 Nut
2 Firewall or metal support
3 Metalstrap
4 Screw
5 Screw(M4 × 8)
# Make sure thatthe unit isinstalled securely in
place. An unstableinstallation maycause skip-
ping or othermalfunctions.
En
12
Section
03
Installation