Filter
Top Products
Injection-molded polypropylene cone
High compliance, rollededge
Heat-resistant voicecoil
Magnet: 170g(6 oz)
Tweeter..........................................f30 mm(1-3/16 in.Dia.)PEI
dome
Magnetic fluid
Neodymium magnet 2.1g(0.07 oz)
Sensitivity ....................................90 dB(±1.5 dB)
Frequency response ...............40 Hzto30 kHz(–20 dB)
Nominal impedance ..............4W
Maximum musicpower .......180W
Nominal power .........................30 W
Grille material............................Steelnet, heat-proofresin
Weight (perspeaker includingaccessory parts)
.....................................................0.71 kg(1lb 9oz)
CEA2006 Specifications
Power output .............................14 WRMS ×4Channels(4
Wand ≦1% THD+N)
S/N ratio.......................................91dBA (reference:1 Winto
4 W)
Parts included
Head unit
Head unit ...........................1
Power cable......................1
Mounting sleeve ............1
Screw ..................................1
Speaker
Speaker ..............................4
Tapping screw(4 mm×18 mm)
...........................................16
Speed nut..........................16
Speaker cable(white)
...........................................2
Speaker cable(gray) ....2
Note
Specifications andthe design are subjectto mod-
ifications withoutnotice.
En
21
English
Appendix
Additional Information