Filter
Top Products
! Adjustedequalizer curve settingsare storedin
CUSTOM.
1 PressM.C. todisplay thesettingmode.
2 PressM.C. toselect BASS(bass)/MID (mid)/TRE-
BLE (treble).
3 Turn M.C. toadjust thelevel.
Adjustment range:+6 to-6
LOUDNESS (loudness)
Loudness compensates fordeficiencies inthelow-
and high-frequency rangesatlow volume.
1 PressM.C. todisplay thesettingmode.
2 Turn M.C. toselect thedesired setting.
OFF (off)—LOW(low)—HIGH(high)
3 PressM.C. toconfirm theselection.
SLA (source leveladjustment)
SLA (SourceLevel Adjustment)letsyou adjustthe vo-
lume levelofeach sourceto preventradical changes
in volumewhen switchingbetweensources.
! Whenselecting FMas thesource, youcannot
switch toSLA.
! Settingsare basedon theFM volumelevel, which
remains unchanged.
! TheAM volumelevel canalso beadjustedwith
this function.
1 PressM.C. todisplay thesettingmode.
2 Turn M.C. toadjust thesource volume.
Adjustment range:+4 to–4
3 PressM.C. toconfirm theselection.
Initial Settings
1 Press SRC/OFF and hold until the unit
turns off.
2 Press M.C. and holduntil CLOCK SET ap-
pears in the display.
3 Turn M.C. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
CLOCK SET(setting theclock)
1 PressM.C. todisplay thesettingmode.
2 PressM.C. toselect thesegment oftheclock dis-
play youwishto set.
Hour—Minute
3 Turn M.C. toadjust theclock.
AUX (auxiliary input)
Activate thissettingwhen usingan auxiliary device
connected tothisunit.
1 PressM.C. toturn AUXon oroff.
USB (plugandplay)
This settingallows youtoswitch yoursource toUSB
automatically.
1 PressM.C. toturn theplugand playon oroff.
ON –WhenUSB storagedevice isconnected, the
source isautomatically switched toUSB.Ifyou
disconnect yourUSB storagedevice,this unit’s
source isturned off.
OFF –WhenUSB storagedevice isconnected,
the source isnotswitched toUSB automatically.
Please changethe sourcetoUSB manually.
Using an AUX source
1 Insert the stereo mini plug into the
AUX input jack.
2 Press SRC/OFF to select AUX as the
source.
# AUX cannotbe selected unlessthe auxiliary
setting is turnedon. For more details,refer to
AUX (auxiliary input) onthis page.
Displaying the clock
% Press CLOCK to turn the clock display
on or off.
# The clock displaydisappears temporarily
when you perform otheroperations, but theclock
display appears againafter 25 seconds.
En
9
English
Section
01
Operating this unit