Filter
Top Products
Taking a phone call
Answering or rejecting an incoming call
Answering anincoming call
1 When acall comesin, pressM.C.
! You canalso perform thisoperation bypush-
ing M.C.up.
End acall
1 Push M.C. down.
Rejecting anincoming call
1 When acall comesin, pushM.C. down.
Notes
! If private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
! The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Operating a call waiting
Answering acall waiting
1 When acall comesin, pressM.C.
! You canalso perform thisoperation bypush-
ing M.C.up.
End allcalls
1 Push M.C. down.
Switch betweencallers onhold
1 PressM.C.
! You canalso perform thisoperation bypush-
ing M.C.up.
Rejecting callwaiting
1 Push M.C. down.
Notes
! Pushing M.C. down ends all calls including
calls waiting on line.
! To end the call, both you and your caller need
to hang up the phone.
Function and operation
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Search &Connect (searchingfor availablecellular
phone)
! This functioncannnot beoperatadwhen thecellu-
lar phoneis connected.
1 PressM.C. tosearch foravailablecellular phones.
While searching,Searching flashes.When avail-
able cellularphones featuringBluetoothwireless
technology arefound, devicenameor Namenot
found (ifnames cannotbe obtained) isdisplayed.
! If thisunit failsto find anyavailable cellular
phones, Notfound isdisplayed.
2 Push M.C. upor downto select adevice name
you wantto connect.
3 PressM.C. toconnect the selectedcellular
phone.
While connecting,Connecting flashes. To com-
plete theconnection, checkthe devicename
(Pioneer BTUnit) andenter the linkcode onyour
cellular phone.If the connectionis established,
Connected isdisplayed.
! PIN codeis setto 0000as thedefault. You
can changethis code.Refer to
Pin codeinput (PINcode input) onpage 17.
Connection open(connecting from cellularphone)
! This functioncannnot beoperatadwhen thecellu-
lar phoneis connected.
1 PressM.C. toopen theconnection.
Disconnect phone(disconnecting a cellularphone)
! This functioncannot beoperated when thecellu-
lar phoneis notconntected.
1 PressM.C. todisconnect a cellularphone from
this unit.
After disconnection iscompleted, Disconnected
is displayed.
Connect phone(connecting aregisteredcellular
phone)
Available accessories
En
22
Section
03