Filter
Top Products
For details concerning operation, refer to the
XM tuner’s operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner’s operation manual.
Basic Operations
5
42 31
1 XM band indicator
2 XM channel number indicator
3 XM preset number indicator
4 XM channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
5 XM text information
Shows the text information of broadcast
channel.
Select anXM band.
1 PressBAND/ESC.
! Band canbe selectedfrom XM-1,XM-2 or
XM-3.
Select achannel.
1 Push M.C. leftor right.
! If youpush andhold M.C. leftor right,you
can increaseor decreasechannelnumber
continuously.
! You canalso perform tuningfrom adesired
channel category.(Refer toSelecting achan-
nel inthe channelcategory onthe next page.)
Switching theXM display
1 Pressand holdDISP/
/SCRL.
Storing and recalling broadcast
stations
You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
1 Press
(list).
Preset screen is displayed.
2 Use M.C. to store the selected station in
memory.
Turn to change the preset number. Press and
hold to store.
3 Use M.C. to select the desired station.
Turn to change the station; press to select.
# You can also change the stationby pushing
M.C. up or down.
Advanced operations using
special buttons
Selecting theXM channelselect mode
1 PressS.Rtrv/SAT MODEto cyclebetween:
Channel number(channel numberselect set-
ting)—Category (channelcategory select
setting)
Function and operation
1 Press M.C. to display the main menu.
2 Use M.C. to select FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to
select.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Available accessories
En
26
Section
03