Pioneer DEQ-P8000 Car Stereo System User Manual


 
LEFT:25 RIGHT:25 is displayed as the left/
right speaker balance moves from left to
right.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish toad-
just.
2 Touch A.MENU and DSP and then touch
SLA.
3 Touch a or b to adjust the source vo-
lume.
Each time you touch a or b it increases or de-
creases the source volume.
SLA +4 SLA 4 is displayed as the source vo-
lume is increased or decreased.
Notes
! The AM tuner volumelevel can also bead-
justed with sourcelevel adjustments.
! Video CD, CD andMP3/WMA are set tothe
same source leveladjustment volume auto-
matically.
! DVD and theoptional DVD player areset to
the same sourcelevel adjustment volume
automatically.
! External unit 1and external unit 2are set to
the same sourcelevel adjustment volume
automatically.
! AUX (auxiliary input) andAV (videoinput) are
set to thesame source level adjustment vo-
lume automatically.
Using the dynamic range
control
The dynamic range refers to the difference be-
tween the largest and softest sounds. The dy-
namic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.
! The dynamic range control is effective only
on Dolby Digital sounds.
! When playing other than the DVD disc, you
cannot switch to D.R.C.
1 Touch A.MENU and DSP and then touch
D.R.C.
2 Touch a to turn the dynamic range con-
trol on.
# To turndynamic range control off, touchb.
Using the down-mix function
This function cannot be operated when DVH-
P7000, DVH-P5000MPor AVH-P6500DVD is con-
nected to this unit.
The down-mix function allows you to play back
multi-channel audio in 2 channels.
1 Touch A.MENU and DSP and then touch
DOWN MIX.
2 Touch
or to switch the setting.
! Lt/Rt Down mix so thatthe surround
components can berestored (decoded).
! Lo/Ro Stereomix the originalaudio that
do not containchannel modes such assur-
round components.
Digital Signal Processor
En
10
Section
03