Filter
Top Products
Other connections
08
64
En
Switching components on and off using
the 12 volt trigger
You can connect components in your system (such as a
screen or projector) to this receiver so that they switch on
or off using 12 volt triggers when you select an input
function. However, you must specify which input
functions switch on the trigger using the The Input Setup
menu on page 69. Note that this will only work with
components that have a standby mode.
• Connect the
12 V TRIGGER
jack of this receiver to
the 12 V trigger of another component.
Use a cable with a mono mini-plug on each end for the
connection.
• The trigger maximum power is DC OUT 12 V/50 mA
(50 mA total for terminals 1 and 2).
After you’ve specified the input functions that will switch
on the trigger, you’ll be able to switch the component on
or off just by pressing the input function(s) you’ve set on
The Input Setup menu on page 69.
Using this receiver with a Pioneer flat
panel TV
If you have a Pioneer flat panel TV, you can use an SR+
cable
1
to connect it to this receiver and take advantage of
various convenient features, such as automatic video
input switching of the flat panel TV when the input is
changed.
2
Important
• You can’t use the SR+ features when HDMI Control
is set to ON. Make sure to set HDMI Control to OFF
when you use the SR+ features (page 67).
• If you connect to a Pioneer flat panel TV using an
SR+ cable, you will need to point the remote control
at the flat panel TV remote sensor to control the
receiver. In this case, you won’t be able to control the
receiver using the remote control if you switch the flat
panel TV off.
• Before you can use the extra SR+ features, you need
to make a few settings in the receiver. See The Input
Setup menu on page 69 and SR+ Setup for Pioneer flat
panel TVs on page 72 for detailed instructions.
DIGITAL
ASSIGNABLE
ASSIGN-
ABLE
MULTI CH IN
IR
ZONE2
OUT
21 -
21 -
2
IN
(DVR1)
2
IN
R
L
R
FRONT CENTER
SURROUND
SURROUN
D
SUBWOOFER
OUT
IN
1
2
12 V TRIGGER
(
OUTPUT
12 V TOTAL
50 mA MAX
)
1
2
12 V TRIGGER
(
OUTPUT
12 V TOTAL
50 mA MAX
)
12V
TRIGGER
VSX-01TXH
Note
1 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Customer Support division for
more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed mini phone plug for the connection).
2 This receiver is compatible with all SR+ equipped Pioneer flat panel TVs from 2003 onward.
DIGITAL
ASSIGNABLE
ASSIGN-
ABLE
OPTICAL
RS-232C
MULTI CH IN
SPEAKERS
A
DVD TV SAT DVR1
CON-
TROL
IR
ZONE2
COAXIAL
HDMI
OUT
OUT
BD IN
21 -
ASSIGNABLE
21 -
21 -
2
IN
(DVR1)
1
IN
1
IN
2
IN
(TV SAT)
1
IN
S-
VIDEO
AUDI O
L
R
L
R
IN
IN
IN IN
IN
INOUT
OUT
DVR2
IN
INOUT
M
OUT
FRONT
R
CENTER
SURROUND
SURROUND BACK
SUBWOOFER
VIDEO
(DVD)
2
IN
(CD)
OUT
OUT
IN
IN
XM
IN
1
2
12 V TRIGGER
(
OUTPUT
12 V TOTAL
50 mA MAX
)
CON-
TROL
IN
OUT
CONTROL
Pioneer flat panel TV
VSX-01TXH
VSX-01TXH_KU.book Page 64 Thursday, March 27, 2008 9:00 PM