Filter
Top Products
Chapter 5: Standard Chart Operations 5-23
Clearing the Current
Route
You can use a Navigator Keypad (see Using the ST60 or ST80 Navigator
Keypad on page 5-15) to name the route.
5. Press
ENTER to finish and clear the Name List, or press CLEAR to cancel
the operation. To return to the default soft key display, press
ENTER again.
Clearing the Current Route
You can clear the current route from the screen. When you select CLEAR ROUTE
if the current route has not been saved, you have the option of saving it and, if
you are following the current route, you have the option to stop.
➤ To clear the current route:
1. Press the
ROUTE default soft key or place the cursor over a route leg until
the text
RTE is displayed.
Press the
CLEAR ROUTE soft key.
2. If you are following the current route the
STOP FOLLOW soft keys are dis-
played.
To cancel the
CLEAR operation press NO.
To stop following and clear the route press
YES.
3. If the route has not been saved the
SAVE ROUTE soft keys are displayed.
To clear the route, without saving it in the route database, press
NO.
To save the route in the database, press
YES. The Name route soft keys are
displayed and you should continue as described in the previous section,
Saving the Current Route on page 5-22.
The current route is cleared from the screen and the default soft keys are
displayed. You can now use the
ROUTE soft keys to make a route, or to show
another route from the database.
Retrieve a Route From the Database
You can select a route as the current route from the database list. The list is
accessed from the second set of
ROUTE soft keys.
➤ To select a route as the current route:
1. Press the
ROUTE soft key, followed by MORE, then press ROUTE LIST. The
route list is displayed as illustrated in Figure 5-7. The selection bar indi-
cates the selected route.
2. Use the trackpad to select the required route then press the
SHOW ROUTE
soft key. The chart is re-drawn at a scale suitable to display the whole route.
ROUTE
RTE
STOP
FOLLOW
SAVE
ROUTE
ROUTE
SHOW
ROUTE