Filter
Top Products
1-8
hsb
2
PLUS Series Color LCD Display
Operating Modes
Operating Modes
Half-Screen Window Options
• Chart display, Radar display: If data is available as a function of the
combined display unit it can be displayed full screen, as shown in
Figure 1-2, or in a half-screen window.
• CDI: This gives the Course Deviation Indicator graphical display, with
data relating to the target waypoint.
• BDI: This gives the Bearing and Distance Indicator graphical display, with
data relating to the target waypoint.
• Nav Data: This shows sixteendata boxes, providing navigational data in
the units specified in your set up. Note that up to 6 of these data boxes are
also available as a user-selectable group (see Section 7.3).
You select the operating mode and windows using the
DISPLAY key as
described in Chapter 2.
Multi-display systems
If you have several
hsb
2
series Radar and Chartplotter displays connected
operation is similar to a combined Pathfinder Radar/Chartplotter Unit:
threefour full-screen modes –radar, chart, radar/chart overlay and data log are
available on all displays.
In addition, if you have an
hsb
2
series Fishfinder display connected, you can
set any display to fishfinder mode; if the system includes a chartplotter, similar
functionality to a combined Fishfinder/Chartplotter is available on all
displays.
On an
hsb
2
system with Radar, Chart and Fishfinder available, the following
information can be shown on any display unit:
For details on the fishfinder, refer to the
hsb
2
Series Display Owner’s
Handbook supplied with your fishfinder.
Table 1-2: Window Options for Integrated Systems
Full-screen mode Half-screen Window Options
Chart Mode, CDI, BDI, Nav Data, Fishfinder or Radar
Radar Mode CDI, BDI, Chart or Nav Data
Fishfinder Mode Depth/temp, Chart or CDI, BDI
Radar/Chart Overlay Windows not available
Data Log Mode Windows not available