Filter
Top Products
Chapter 5: Standard Chart Operations 5-31
Follow a Route
You should always check the target waypoint before initiating a follow
route.
➤ To follow the current route:
1. Press the
GOTO default soft key. The Goto/Follow soft keys are displayed.
2. Press the
FOLLOW ROUTE soft key.
Alternatively, to follow a route:
1. Place the cursor over a route leg until the letters
RTE and the route soft keys
are displayed then press
FOLLOW ROUTE.
Your vessel’s current position becomes the origin, and the target waypoint in
the current route becomes the active target.
The soft keys change as follows:
These options are described in the following sections.
➤ To follow the current route in reverse:
1. Press the
ROUTE default soft key, followed by MORE. The route soft keys
are displayed.
2. Press the
REVERSE ROUTE soft key. The current route is reversed on the
screen. Press
ENTER or CLEAR.
3. Press the
GOTO default soft key. The Goto/Follow soft keys are displayed.
4. Press the
FOLLOW ROUTE soft key.
The soft keys change as follows:
These options are described in the following sections.
Alternatively:
1. Place the cursor over the route leg until the letters
RTE and the route soft
keys are displayed. Press
REVERSE ROUTE then FOLLOW ROUTE.
Your vessel’s current position becomes the origin, and the target waypoint in
the current route becomes the active target.
GOTO
FOLLOW
ROUTE
RTE
FOLLOW
ROUTE
D4251_1
CLEAR
ROUTE
REVERSE
ROUTE
EDIT
ROUTE
STOP
FOLLOW
ROUTE
REVERSE
ROUTE
GOTO
FOLLOW
ROUTE
D4172-1
RESTART
XTE
WAYPOINT
ADVANCE
GOTO
CURSOR
STOP
FOLLOW
RTE
REVERSE
ROUTE
FOLLOW
ROUTE