Filter
Top Products
16
Pause CD
1. Press the MUTE (Mute/Pause) button to pause the
CD.
2. Press the MUTE (Mute/Pause) button a second time
to resume playing the disc.
NOTE: The panel will display PAUSE and the track
number until the function is canceled.
Direct Track Access
Direct Track Access allows any track to be immediately selected
and played. This method is faster than manually cycling through
each track on the disc.
1. Press the T-ACC (AS–TRACK ACC) button to select Direct
Track Access mode.
2. Press the number, 1-2-3-4-5-6-7-8-9-0, to access the desired
track on the disc.
EXAMPLE: Pressing the T-ACC (AS–TRACK ACC) button, then 01 takes you to track 1, pressing 12
takes you to track 12 and so forth. Pressing just 1 digit, 7, will take you to track 7 after
5 seconds.
RFX8810 CD Changer Operation (Optional Accessory, Model 9210 Only)
Magazine Eject
1. Press the EJECT button to release the disc
magazine from the CD changer.
NOTE: The panel will display NO CD, if in CDX
mode, then go to AUX1 mode.
CD Changer Reset
Press the RESET button if the changer gets jammed
during operation.
Loading Disc to the Magazine
1. Pull out the desired disc tray number from the magazine.
2. Place the disc into the magazine, label side up.
3. Push the disc tray back into the magazine.
NOTE: Discs numbers are arranged from the bottom up.
Loading the Magazine to the CD Changer
The INSERT IN THIS DIRECTION arrow indicates the proper direction that
the magazine should be loaded into the CD changer.
CAUTION: Avoid installing or leaving the magazine where it
would be subject to high temperatures such as
from direct sunlight or from hot air from the
heater. Doing so will damage the unit.
Remote
Remote
LABEL SIDE UP
EJECT
RESET
8
5
6
1
2
3
4
7
OPERATION – CD PLAYER
R75
LABEL SIDE UP.
INSERT IN THIS DIRECTION
PLACE COMPACT DISC INTO MAGAZINE WITH
.
COMPACT
DIGITAL AUDIO
PLACER LE DISQUE COMPACT DANS LE
CHARGEUR, FACE ETIQUETEE VERS LE HAUT.
!