Filter
Top Products
17
English
Audio connections:
Connect the left and right analog audio out-
puts from the set-top box to the AUDIO DBS
IN LEFT & RIGHT jacks
on the RSDX-02
using a standard RCA stereo audio cable.
Digital Audio connection:
If your set-top box has a digital audio output,
you should connect it to the RSDX-02 for play-
back of Dolby Digital broadcasts.
1. If the set-top box has a coax digital out-
put, connect it to the DIGITAL 1 (DBS) in-
put
on the RSDX-02 using a coax digi-
tal cable. The RSDX-02 is pre-configured
to use this digital input for the set-top box.
2. If the set-top box only has an optical digi-
tal output, connect it to the DIGITAL 2 (TV)
input
on the RSDX-02 using an optical
digital cable. The RSDX-02 will need to be
reconfigured to associate this input with the
set-top box input. See the Setup section of
this manual.
VCR or Digital Video Recorder
See Figure 6
This section describes the hook-up of hi-fi VCRs
with audio and video outputs. VCRs connected
with RF antenna cables are connected directly
to the TV, not to the RSDX-02.
Video connections:
Your VCR may have composite video or S-Video
outputs. Choose whichever type of connection
is appropriate for your system, keeping in mind
that there must be a corresponding connec-
tion of the same type from the RSDX-02 to the
TV.
1. For composite video, connect a compos-
ite video cable from the video output of
the VCR to the VIDEO VCR IN input
on the RSDX-02. Connect the VIDEO VCR
OUT output
on the RSDX-02 to the com-
posite video input on VCR
2. For S-Video, connect an S-Video cable from
the video output of the VCR to the S-VIDEO
VCR IN input
on the RSDX-02. Connect
the S-VIDEO VCR OUT output
on the
RSDX-02 to the S-Video input on VCR.
Audio connections:
Connect the left and right analog audio out-
puts from the VCR to the AUDIO VCR IN LEFT
& RIGHT jacks
on the RSDX-02 using a stan-
dard RCA stereo audio cable. Connect the
AUDIO VCR OUT LEFT & RIGHT audio out-
puts
on the RSDX-02 to the left and right
audio inputs on the VCR.
Digital Audio connection
(for digital video recorders):
If your video recorder has a digital audio output,
you should connect it to the RSDX-02 for play-
back of Dolby Digital recordings.
1. If the video recorder has a coax digital out-
put, connect it to the DIGITAL 1 (DBS) in-
put
on the RSDX-02 using a coax digi-
tal cable. The RSDX-02 will need to be
reconfigured to associate this input with the
VCR input. See the
Setup
section of this
manual.
2. If the video recorder has an optical digi-
tal output, connect it to the DIGITAL 2 (TV)
input
on the RSDX-02 using an optical
digital cable. The RSDX-02 will need to be
reconfigured to associate this input with the
VCR input. See the Setup section of this
manual.
3. Connect the DIGITAL OUT connector
on the RSDX-02 to the digital input on the
video recorder with an optical digital cable.
CD Player/CDR Recorder
See Figure 7
Audio Connections:
1. Connect the left and right analog audio
outputs from a CD/CDR to the LEFT/RIGHT
AUDIO TAPE/CDR IN jacks
on the
RSDX-02 with a standard RCA stereo au-
dio cable.
2. With a CDR recorder, connect the LEFT/
RIGHT AUDIO TAPE/CDR OUT jacks
to the audio inputs on the CDR.
Digital Audio connections:
If your CD/CDR has digital audio connections,
you should connect them to the RSDX-02.
1. If the CD/CDR has a coax digital output,
connect it to the DIGITAL 1 (DBS) input
on the RSDX-02 using a coax digital cable.
The RSDX-02 will need to be reconfigured
to associate this input with the TAPE/CDR
input. See the
Setup
section of this manual.
2. If the CD/CDR has an optical digital out-
put, connect it to the DIGITAL 2 (TV) input
on the RSDX-02 using an optical digi-
tal cable. The RSDX-02 will need to be
reconfigured to associate this input with the
TAPE/CDR input. See the
Setup
section of
this manual.
3. When using a CDR recorder, connect the
DIGITAL OUT connector
on the RSDX-02
to the digital input on the CDR with an
optical digital cable.
NOTE
: No video connections are required for
an CD player/CDR recorder.
Audio Tape Recorder
See Figure 8
Audio Connections:
1. Connect the left and right analog audio
outputs from the audio recorder to the LEFT/
RIGHT AUDIO TAPE/CDR IN jacks
on
the RSDX-02 with a standard RCA stereo
audio cable.
2. Connect the LEFT/RIGHT AUDIO TAPE/
CDR OUT jacks
to the audio inputs on
the tape recorder.
NOTE
: No video or digital connections are
required for an audio tape recorder.
AM Antenna
See Figure 9
The RSDX-02 includes a plastic loop antenna
to receive AM radio signals. Remove this
antenna from the box and locate it near the
RSDX-02. It can be tacked to a wall, using the
mounting tab provided. Alternatively, you can
fold the center portion of the antenna to form
a tabletop stand.