Filter
Top Products
-10-
Signal Error Rate: Indicates signal quality.
0 - 15: good;
16 - 30: Acceptable;
Over 30: Poor.
Note:
- Press the f or e button repeatedly to scroll the user through the
available menu option (under setup menu), service station lists.
while in the service scrolling state, press the SELECT/PTY CHECK/
RANDOM button (or the RANDOM/SELECT button on the remote
control) to select the requested service. If there is no input after 7
seconds, return to original display.
- In normal display mode, press the f or e button will cause the
display scroll through the service list.
w
scroll over
- If the displayed service is one of the first 10 services on the list and it
is in favourite order, as indicated by “
”.
“ ” appears
- If the service has been saved to preset button, then it is indicated by
the preset number 1, 2, etc.
preset number
- If the service is not active (e.g. it is invalid), it is indicated by “?”.
- If the service is a primary service and it has secondary services then
it is indicated by “>>”, and if the service is as secondary then it is
indicated by “<<”.
To preset DAB stations
Up to 10 station can be preset.
Automatic presetting
Automatic programming will start from preset 1. It allows you to save your
favorite stations as presets.
1. Sort the list of available stations by Fav station order (as “Sorting
Stations” in the previous page shows).
2. Press f or e button briefly, until “
v PRESETS” appears
then press the SELECT/PTY CHECK/RANDOM button (or the
RANDOM/SELECT button on the remote control).
- All the favorite stations are stored in the preset locations starting from
preset number 1, overwriting the presets in the respective locations.
Manual presetting
1. Tune in the DAB station to be preset.
2. Press the MEMORY button.
3. Press the f or e button to select the channel number to be preset.
- In this example, station “Plant Rock” is preseted in channel number 4.
4. Press and hold the MEMORY button for 2 seconds till “Preset X saved”
appears. (X
––
1~10, means the channel number you have preset in
step 3).
Current station is stored to the desired channel number.
Note:
Using the remote control, you can press the number buttons directly.
Example:
To select No.3, press and hold the 3 button until “Preset 3 saved” appears.
To select No.10, press and hold the 0 button until “Preset 10 saved”
appears.
Listening to preset stations
1. Press the FUNCTION button to select DAB function.
2. Press the MEMORY button.
3. Press the f or e button to select the preset number.
4. Press the SELECT/PTY CHECK/RANDOM button (or the RANDOM/
SELECT button on the remote control) to confirm the station.
Note:
Using the remote control, you can press the number buttons directly.
Example:
To select No.3, press the 3 button for less than 2 seconds.
To select No.10, press the 0 button for less than 2 seconds.
About DAB radio what to do if ...
In the DAB radio mode if the operation of the unit or display is not normal,
1. Press and hold the SET UP/RDS MODE button (or the SET UP/
REPEAT button on the remote control) till “press SELECT to confirm
reset...” appears.
2. Press the SELECT/PTY CHECK/RANDOM button (or the RANDOM/
SELECT button on the remote control).
3. Resume the operation.
DAB03UK(En)p05-10-07 05/12/2005, 2:03 PM10