Sanyo FXCD-1100 Car Stereo System User Manual


 
-ā12ā-
LOCATING THE BEGINNING OF A PROGRAM (AMSS) 5, 6, 7....
Thissystem isequipped with afunction that allows youto skipforward or backwardtolocate thebeginning of
a particularselection on thetape. (AutomaticMusic SelectSystem :AMSS)
1 Press theAMSS button . " is displayed.
2 Press buttontoskip forwardup to9 selectionsfrom thecurrent locationon thetape.
e.g.)With " displayed,press buttonthree times. " is displayed.
The systemwill searchfor 3blank spacesbetween selectionsin theforward direction,then begin
playingthe thirdselection from thestarting point.
3 Pressbuttontoskipbackwardtothebeginningofthecurrentselection,orupto8selectionsfromthecurrent
locationon thetape.
e.g.)With " displayed,press buttonfive times. " is displayed.
The system willsearch for 5blank spaces betweenselections in thebackward direction, thenbegin
playingtheforthselectionfromthestartingpoint.(Theblankspacebeforethecurrentselectioncounts
as one blankspace.)
4 To cancelAMSS mode,press buttonagain.
Notes
S If AMSS detects 15 seconds of blank space, it will automatically advance the tape to
the next selection.
S AMSS may not operate properly if
S A tape was recorded at low level.
S A tape has long, silent intervals.
S A tape is a live recording.
DOLBY B NOISE REDUCTION BUTTON 8..................
ToplaybackatapeencodedwithDolby*NR,pressbutton.WhenDolby*NRisactivated,theindicatorlights.
Toplay othertapes notencoded withDolby* NR, pressthe buttonto switch Dolby* NR off.The indicatorgoes
out.
*DolbynoisereductionmanufacturedunderlicensefromDolbyLaboratoriesLicensing Corporation.
Dolby"and thedouble-Dsymbol aretrademarks ofDolby LaboratoriesLicensing Corporation.
METAL PLAY MODE 9....................................
If a metal or high-position tape is used, pressmetal button to make the player inmetal play mode. MTL is
indicated.
REPEAT MODE 10........................................
Thisoperation makesit possible tolisten repeatedlyto aselection.
Press RPT during play. Theselection playingwill continue untilRPT ispressed again.