Filter
Top Products
NG OK
Burnt
Fuse 15A
-ā28ā-
Notes
S When using a twoĆspeaker installation, the Green, Green/Black, Violet, Violet/Black wires, which
are used for a fourĆspeaker installation, are not used. The ends of these wires must be covered
with electrical tape to prevent them from shorting to the unit or the vehicle chassis.
S When using a twoĆspeaker installation, set
the FADER control to the center position.
S When fuse replacement is necessary reĆ
move the blown fuse by using pliers. Then
install the new 15 amp. fuse.
LINE OUT/CD CHANGER CONNECTIONS
S Theunit has abuiltĆin CD changercontrollerand line output terminals. Youcan usea compatible SanyoCD
changer anda separate rearchannel amplifier to upgrade your system.
CD ChangerDIN Socket
RCA LineĆout Jacks
White
(Left)
Red
(Right)
CDChanger
External
Amplifier
RearSpeaker
CD ChangerDIN Socket
S Connect the8ĆpinDIN cable, which is suppliedwiththeAX-300, AX-500orothercompatible SanyoCD
changer, to the DIN socket on theback of the unit.
RCALineĆout Jacks(ForRear Speakers)
S Connectapatchcable(notsupplied) fromtheWhite (left rear channel)andRed (right rear channel)RCA
line output jacks to the lineinput terminals of theexternal amplifier.