Sanyo FXCD-1350 Car Stereo System User Manual


 
-9-
GENERAL OPERATION
TURNING THE POWER ON........................................ 1
Install the front panel and press the POWER button when ACC is on.
TURNING THE POWER OFF ...................................... 1
Press the POWER button to stop the current operation.
The button dims when the power is off (ACC on).
ELECTRONIC CONTROLS......................................... 2
Press the AUDIO button , then press the AUDIO button to select the audio functions as shown in the
table below.
Turn the VOL knob
to adjust the selected function ; bass, treble, balance, fade, or volume.
SOUND EFFECT BUTTON ......................................... 3
Press the SOUND Button for less than 1.5 second.
Each time the button is pressed, the function changes as shown below.
7
5
2
3
6
4
1
MODE
bAS(bass)
TRE(treble)
bAL(balance)
FAd(fader)
VOL(volume)
Turn left (Min)
Down -5
Down -5
Left L9
Rear R9
Down 0
Turn right (Max)
UP +5
UP +5
Right R9
Front F9
UP 35
While no other mode is displayed, the VOL knob function as a volume control.
Note
FLAT
JAZZ
ROCK
1
2
3